Research Study of ROS2 Library and Interface Development for Industrial Robotic Arm Mitsubishi RV2-SDB

DOI: https://doi.org/10.33650/jeecom.v7i1.10663

Authors (s)


(1) * Eko Budi Utomo   (Politeknik Elektronika Negeri Surabaya)  
        Indonesia
(2)  Mochammad Abdul Aziz   (Politeknik Elektronika Negeri Surabaya)
(*) Corresponding Author

Abstract


This research study is purposed for development the ROS2 library wich provides the ROS2 interface for industrial robotic arm Mitsubishi RV-2SDB. This library for facilitate the important data acces, such as data joint, position, jog mode, error message, and alarm. By utilizing the ROS2, this library designed for integration suport and robot development in simulation of industrial process, as well as wider automation. The use of ROS2 is deployment modularity and scalability, enable to easier integration with existing automation system. Research studies show that this library is able to improve the efficiency and reliability of robot operations, supporting the industrial revolution 4.0 by creating flexible and integrative solutions.

Keywords

Robotic Arm, Industrial Automation, ROS2



Full Text: PDF



References


Ahdiat, A. "Penggunaan Robot Industri Meningkat, Capai Rekor pada 2021", MANUFACTURER, 01 November 2022.

Adi Ahdiat, “Penggunaan Robot Industri Meningkat, Capai Rekor pada 2021,”https://databoks.katadata.co.id/datapublish/2022/11/01/penggunaan-robot-industri-meningkat-capai-rekor-pada-2021.

Bonci, A., Gaudeni, F., Giannini, M.C., & Longhi, S. (2023). Robot Operating System 2 (ROS2) - Based Frameworks for Increasing Robot Autonomy. Department of Information Engineering (DII), Polytechnic University of Marche, Italy.

C. Han, H. Ma, W. Zuo, S. Chen and X. Zhang, "A General 6 DOF Industrial Robot Arm Control System Based on Linux and FPGA," 2018 Chinese Control And Decision Conference (CCDC), Shenyang, China, 2018, pp. 1220-1225, doi: 10.1109/CCDC.2018.8407315.

“CIROS Studio”, https://www.verosimsolutions.com/en/industry/ciros-studio/

“CIROS ® VR Virtual Reality Dimulation for Immersive Automation Training.”, F. Didactic, Tersedia pada: www.festodidactic.de.

Endrika Decky Marselino, “Modul Praktikum Otomasi Pick And Place Robot Sebagai Pembelajaran Industrial Motion, Vision Sensor, Dan Web Server Gui”, 2021, Teknik Mekatornika. Politeknik Elektronika Negeri Surabaya.

Fabrice Boisset, “The History of Industrial Automation in Manufacturing,”. https://www.automate.org/editorials/the-historyof-industrial-automation-in-manufacturing.

Faudin, A. "Apa itu protokol komunikasi RS485?", Nyebar Ilmu, 16 November 2019. Dapat diakses https://www.nyebarilmu.com (diakses 15 Juli 2024).

Info Solutech. "PENGERTIAN, FUNGSI, DAN CARA KERJANYA." Info Solutech, 1 November 2023. Dapat diakses dari https://solutech.id/ (diakses 16 Juli 2024).

Mitsubishi Electric Corporation. (n.d.). RV-2SD/2SDB Instruction Manual: Robot Arm Setup & Maintenance. BFP-A8791-D. Mitsubishi Electric Corporation.

“MELFA RV-2SDB / RV-2SQB Series”. https://us.mitsubishielectric.com/fa/en/support/technicalsupport/knowledge-base/getdocument/?docid=3E26SJWH3ZZR-38-1447.

Papcun Peter, Jadlovský Ján, (2015), “Mathematical Model of Robot Melfa RV-2SDB”, Technical University of Kosice, pp. 1-10.

P. Bora and V. Nandi, "Low Cost Shadow Function Based Articulated Robotic Arm" 2015 International Conference on Energy, Power and Environment: Towards Sustainable Growth (ICEPE), Shillong, India, 2015, pp. 1-4, doi: 10.1109/EPETSG.2015.7510079.

Rasyidin, A. N. (2024). Implementasi Gerak Robot Lengan Mitsubishi RV-2SDB (Palletizer) Menggunakan Metode Hierarchical Finite State Machine untuk Sistem Sortir Berdasarkan Ukuran Box. Proyek Akhir, Program Studi Sarjana Terapan Teknik Mekatronika, Politeknik Elektronika Negeri Surabaya.

Raza, N. "ABB robot arm (IRB 1200) with Siemens (S7 1200) PLC - can communicate via Ethernet/IP Anybus Adapter?", Siemens Support, 17 Juli 2019. Dapat diakses dari https://support.industry.siemens.com/ (diakses 15 Juli 2024).

Raza, N. "Controlling ABB robot arm (irb 1200) with Siemens PLC", Robot Forum, 19 Juli 2019. Dapat diakses dari https://www.robot-forum.com/ (diakses 15 Juli 2024).

Seung, J.R., and Kosuke, I. “Using Cost Based FMEA to Enhance Reliability and Serviceability”, Journal of Advanced Engineering Informatics, Vol.17, pp. 179-188, 2003.

“Siemens S7-1200 PLC CPU – 14 (Digital Input, 2 switch as Analogue Input) Input, 10 (Digital Output, Transistor Output)”, https://www.rs-online.id/p/simatic-s7-1200-cpu-1214c-dc-dc-dc/

Softscients. "Pengertian dan Penggunaan Modul I2C: Memahami Komunikasi Serial Antar-Perangkat", Softscients, 29 November 2023. Dapat diakses https://softscients.com/ (diakses 15 Juli 2024).

“Spesifikasi Arm Robot Mitsubishi MELFA RV-2SDB”, Mitsubishi Electric, 2010, https://us.mitsubishielectric.com/fa/en/support/technicalsupport/knowedge-base/getdocument/?docid=3E26SJWH3ZZR-38-1447.

Teloken, F. "ESP32 I2C Communication: Set Pins, Multiple Bus Interfaces and Peripherals (Arduino IDE)", Random Nerd Tutorials, 2 Oktober 2019. Dapat diakses https://randomnerdtutorials.com/ (diakses 15 Juli 2024).

Y. Zhang, X. Li, H. Zhu and Ning Tan, "Joint-Angle-Drift Remedy Of Three-Link Planar Robot Arm Performing Different Types Of End-Effector Trajectories" 2009 IEEE International Conference on Intelligent Computing and Intelligent Systems, Shanghai, China, 2009, pp. 581-585, doi: 10.1109/ICICISYS.2009.5358320.


Dimensions, PlumX, and Google Scholar Metrics

10.33650/jeecom.v7i1.10663


Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Eko Budi Utomo, Mochammad Abdul Aziz

 
This work is licensed under a Creative Commons Attribution License (CC BY-SA 4.0)

Journal of Electrical Engineering and Computer (JEECOM)
Published by LP3M Nurul Jadid University, Indonesia, Probolinggo, East Java, Indonesia.