Rancang Bangun Sepeda Listrik 250 Watt Dengan Pengaman NFC (Near Field Communication)
AbstractIn The electric bicycle is one of the many alternative fuel vehicles. This electric bicycle uses electricity as its power source. Whose electrical energy is converted into motion energy. To convert electrical energy into motion energy, an electric dynamo is needed. The electric dynamo here becomes the engine core of the electric bicycle. The purpose of this research is to design a 250 watt electric bicycle security system using NFC (Near Field Communication). This system is designed for the safety of a 250 watt electric bicycle as a contact substitute for powering a 250 watt electric bicycle with a working system to detect an NFC card (Near Field Communication) which already provided. In testing the 250 watt electric bicycle security system, the test results obtained are in accordance with what is wanted in this study, namely the 250 watt electric bicycle security system using NFC (Near Field Communication) can detect the card to read the pins that are already on the card that has been provided with output motorbikes can turn on and only the card owner can operate the 250 watt electric bicycle. |
Full Text:
References
Putra, H. (2019). “Perancangan Sepeda Listrik Dengan Menggunakan Motor DC Seri”. Sulawesi Tenggara: Universitas Halu Oleo kendari Sulawesi Tenggara.
Satria, D. (2017). “Analisa Perhitungan Energi Listrik Pada Sepeda LIstrik Hybrid”. Banten: Universitas Sultan Ageng Tirtayasa.
Ahmad Saefudin Firdaos, (2017) dengan project yang berjudul “Sistem Pengamanan dan Pemantau Sepeda Motor Menggunakan NFC (Near Field Communication) dan GPS (Global Positioning System)”.
Setiyawan, B. (2012). “Rancang Bangun Sepeda Listrik. Surakarta: Universitas Sebelas Maret”.
Murdianto, O. B. (2012). “Pengembangan Model "Regenerative Brake " pada Sepda Listrik untuk Menambah Jarak Tempuh”. Surabaya:
Institut Teknologi Sepuluh Nopember (ITS).
Aji, D. K. (2018). "Sistem Pengaman Sepeda Motor Dengan Arduino Berbasis Android". Surakarta : Universitas Muhammadiyah Surakarta.
Bahri, S. (2015). "Rancang Bangun Prototype Sistem Kontrol Jarak Jauh Berbasis Ponsel Android". Makassar: Universitas
Muhammadiyah Makasar.
D. T. Laksono "Rancang Bangun Pembuatan Kopi Otomatis Berbasis Arduino Mega", J.Teknik.Elektro dan Komputer. TRIAC, vol. 7, no.1, 2020.
Naufal Miftaahul A.S, Defa Mulyana, and Ilham Yusuf A "Pengaturan Kecepatan Motor Brushless DC (Direct Current)Menggunakan Cuk Converter"J. Teknik Elektrodan Komputer. TRIAC, vol 6, no.2, 2019.
Rafli Fajar Anugrah "Kontrol Kecepatan Motor Brushless DC Menggunakan SIX Step Comucation Dengan Kontrol PID (Propotional Integral Derivative) " J. Teknik Elektro dan Komputer. TRIAC, vol 7, no.2, 2020.
10.33650/jeecom.v3i1.1935 |
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Siti Sulistyawati
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.